Denon HOME SOUND BAR 550 - Operation and Connectivity Settings

Quick select function
Input source, volume level, sound mode, night mode and dialog enhancer settings can be registered to the QUICK SELECT buttons.
1
Press and hold down one of the QUICK SELECT buttons (1 - 3) for 3 seconds.
The current settings are registered to the selected button.
0
The status LED flashes once when registration is complete.
0
To recall the registered settings, press the QUICK SELECT button.
[Default settings]
Button Input source Volume Sound mode Night mode Dialog enhancer
Quick Select 1 TV 35
For Dolby audio signal input: Dolby Surround
For DTS audio signal input: DTS Virtual:X
For other audio signal input: Dolby Surround
Off Off
Quick Select 2 HDMI IN 35 Off Off
Quick Select 3 OPTICAL 35 Off Off
Quick Select 4
z
AUX 35 Stereo Off Off
Quick Select 5
z
– – – – –
Quick Select 6
z
– – – – –
z Registration and calling of Quick Select 4-6 can only be performed on the HEOS App. Download the HEOS App in advance to your iOS or Android device. (v p. 31)
0
In the default state, Quick Select 5 and 6 are not set. Your own settings can be registered and used.
Contents Connections Playback Settings Tips Appendix
56