Status Front LED action Rear LED action Description
Error
.
(solid)
.
(solid)
There was a setup error. Check your usage environment, then
follow the correct procedure to try setup again. If the error occurs
again, restore factory settings and try setup again. (v p. 69)
.
(fast blink)
.
(off)
There is a hardware error. Unplug the power cord, wait a little while,
then plug the power cord back in.
Reset
.
(fast blink)
.
(solid)
Factory settings have been restored.
Contents Connections Playback Settings Tips Appendix
80
To Next Page
Loading...
