VERSION 1.1
Looping
You have up to 8 loops per track in Serato DJ, and the choice between either
manual or auto loops. You can choose whether you have 4 loops (and 4 cuepoints)
showing on screen, or 8 loops. To switch between Manual and Auto looping, click
(Manual) or (Auto) onscreen.
MC2000 Control Manual Looping
IN Set loop in point (Loop not active)
IN Edit start of loop point (Loop active)
OUT Set end of loop point (If Loop in point set)
OUT Edit end of loop point (Loop active)
AUTO/EXIT Exit Manual Loop
NOTE: The best way to edit the start and end points of a manual loop is with the jog
wheel/platter on your Denon DJ MC2000.
MC2000 Control Auto Looping
AUTO/EXIT Start Auto Loop
- Halve Auto Loop length
+ Double Auto Loop length
NOTE You can also save a loop to the next available free loop slot in the software.
To do this, either click the button in the manual/auto loop tab or click on an
available loop slot. Your loops are saved to the le and recalled the next time it is
loaded. They are not lost if the le is moved or renamed.