Denon MC6000MK2 - Safety and Compliance Information; General Safety Warnings and Precautions; FCC Compliance and Notices

Installation and Setup
The Denon MC6000MK2 is a class compliant USB plug and play device for
Mac, however requires drivers for Windows. You will nd these on the installation
CD provided with your Denon MC6000MK2.
NOTE: Please ensure you have the latest available drivers AND rmware updates,
which may be required in order to be compatible with Serato DJ. Please go to
http://serato.com/dj/support
1. Download and install the latest version of Serato DJ from http://serato.com/
dj/downloads
2. After installing drivers, connect your Denon MC6000MK2 to an available
USB Port.
3. Open Serato DJ.
4. The Denon MC6000MK2 platters require a few touches by the user in
order to calibrate to their environment. After power up and start of Serato
DJ, tap the platters a few times to set their sensitivity.
Serato DJ Activation
To nd out how to activate Serato DJ by either starting your free 14 day trial, or
purchasing a license for Serato DJ, click here for the most up to date information.
# Denon MC6000MK2 Control
1 DV 12V Power input
2 Controller ON/OFF
3 USB 2.0 Input
4 USB Audio line select switch
5 Balanced Booth Output L/R
6 Balanced Master XLR Output
L/R
7 Mono/Stereo switch
8 Unbalanced RCA Master Output
9 Line 4 L/R Input
10 Phono/Line Switch
11 Line 3 L/R Input
12 Phono/Line Switch
13 Line 2 L/R Input
14 Line 1 L/R Input
15 MIC 2 TRS Input
1 2 3 4 5 6 7 8 9 10 11 121314 15 16
17 18 19 20 21 22 23 24 25 26 27 28
16 MIC 1 XLR Input
17 Headphones Input
18 Headphone volume
19 Cue/Master volume
20 Split Cue switch
21 MIC 1 EQ LOW/MID/HI
22 MIC 2 EQ LOW/MID/HI
23 MIC Echo
24 Fader Assignment CH3 L/Thur/R
25 Fader Assignment CH1 L/Thur/R
26 X Fader Curve Dial
27 Fader Assignment CH 2 L/
Thur/R
28 Fader Assignment CH 4 L/
Thur/R