EasyManuals Logo

Denon MC6000MK2 Quick Start Guide

Denon MC6000MK2
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Serato Video
Serato Video is an Expansion Pack for Serato Software which adds the ability to
playback and mix video les, use effects and fader transitions with your Serato
DJ hardware, an additional MIDI controller or your mouse/keyboard.
For more information on Serato Video go to http://serato.com/video
When using the MC6000MK2 with Serato Video, the following functions apply:
MIDI
The MIDI control feature in Serato DJ provides the ability to map Serato DJ
software functions to MIDI controller functions such as keyboards, triggers,
sliders, and knobs. Integrating MIDI controllers into your Serato DJ setup can
improve live performance usability, such as hitting pads on a MIDI controller to
trigger Loops and Cue Points.
For more information download the Serato DJ manual by going to http://serato.
com/dj/downloads
NOTE: You can not MIDI Map your Denon MC6000MK2, you will need to con-
nect an additional MIDI controller to use these MIDI functions.
The MC6000MK2 also has a dedicated Video mode. To boot the unit up in
dedicated Video mode hold [SHIFT+ VIDEO ON (x2)] at the same time, then turn
on the MC6000MK2. Once the unit is turned on, press the BROWSER knob and
the controller will now be in Video mode.
In the dedicated Video mode, the following functions control Serato Video:
Denon MC6000MK2
Control
Function Shift
Video FX Knob 1 Highpass/Lowpass lter Adjust Video FX 1
Wet/Dry
Video FX Knob 2 Highpass/Lowpass lter Adjust Video FX 2
Wet/Dry
Video FX ON button N/A Turns Video FX 1 On
Video FX ON button N/A Turns Video FX 2 On
X-F Link Button Links crossfader to
Serato Video
Toggles Video
transition
Denon MC6000MK2 Control Function
Video FX Knob 1 Adjust Video FX parameter for Left Deck
Video FX Knob 2 Adjust Video FX parameter for Right Deck
Video FX ON button Switch to Filter Mode
Video FX ON button Switch to Video Mode
Pressing SHIFT will exit this mode and return to the original controller function.

Other manuals for Denon MC6000MK2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon MC6000MK2 and is the answer not in the manual?

Denon MC6000MK2 Specifications

General IconGeneral
Mixer sectionYes
Product colorBlack, Multicolour
Scratcher typeVinyl scratcher
Frequency range20 - 20000 Hz
Output level (XLR)-60 dBV
Output level (L, R)24 dBV
Built-in optical drive-
Equalizer bands quantity3
Number of mixer channels4 channels
Signal-to-Noise Ratio (SNR)84 dB
Number of scratcher platters2
Number of dedicated effects controls1
Signal-to-Noise Ratio (SNR) (headphone out)82 dB
Total Harmonic Distortion plus Noise (THD+N)0.05 %
Maximum output level (booth, unbalanced, L, R)4
USB connector typeUSB Type-B
Microphone connectivityXLR
Input voltage120 - 230 V
Power supply typeAC
Built-in displayNo
Bundled softwareSerato DJ Intro
Weight and Dimensions IconWeight and Dimensions
Depth283.7 mm
Width460 mm
Height71.5 mm
Weight4300 g

Related product manuals