Denon MC6000MK2 Quick Start Guide

# Denon MC6000MK2
Control
Function Shift Function
1 CH ASSIGN Applies FX to selected channels
2 FX KNOBS Adjust Slot 1-3 FX Parameter Turn Knob 1 (Select Effect in Slot 1),
Turn Knob 2 (Select Effect in Slot 2),
Turn Knob 3 (Select Effect in Slot 1)
3 FX BUTTONS (P1,2,3) Slot 1-3 Effect On/Off Button 1 (Select Effect in Slot 1), Button
2 (Select Effect in Slot 2), Button 3
(Select Effect in Slot 1)
4 TAP Tap to set desired BPM/hold to reset
5 BEATS Turn to adjust Beats Multiplier setting/ push down to reset to 1/1
6 EQ (knobs) Adjust HI, MID and LOW
7 INPUT SELECT Toggles between available Line channels LN3,LN1,LN2,LN4 and PC mode
8 CH LEVEL Toggles focus between library, crates and open panels
9 INPUT SELECT Toggles between available Line channel LN1 and PC mode
10 LOAD Load selected track to Deck 1 (Press twice to Instant Double)
11 FILTER LP/HP lter combo adjust for channel 1
12 FILTER ON Turn lter combo on/off for channel 1
13 BROWSER Browses through currently focused area (library/crates/open panels) Click to
move between library and crates
14 FILTER ON Turn lter combo on/off for channel 2
15 LOAD Load selected track to Deck 2 (Press twice to Instant Double)
16 FWD Toggles focus between library, crates and open panels
17 IN Set loop in point (Loop not active)/Adjust loop in point (Loop active)
18 OUT Set loop out point (Loop in point set)/Adjust loop out point (Loop active)
19 MASTER LEVEL Adjusts the master output’s audio level
NOTE: The SHIFT button is used with other buttons that have shift modier functions.

Denon MC6000MK2 Specifications

General

Mixer section	Yes
Product color	Black, Multicolour
Scratcher type	Vinyl scratcher
Frequency range	20 - 20000 Hz
Output level (XLR)	-60 dBV
Output level (L, R)	24 dBV
Built-in optical drive	-
Equalizer bands quantity	3
Number of mixer channels	4 channels
Signal-to-Noise Ratio (SNR)	84 dB
Number of scratcher platters	2
Number of dedicated effects controls	1
Signal-to-Noise Ratio (SNR) (headphone out)	82 dB
Total Harmonic Distortion plus Noise (THD+N)	0.05 %
Maximum output level (booth, unbalanced, L, R)	4
USB connector type	USB Type-B
Microphone connectivity	XLR
Input voltage	120 - 230 V
Power supply type	AC
Built-in display	No
Bundled software	Serato DJ Intro

Weight and Dimensions

Depth	283.7 mm
Width	460 mm
Height	71.5 mm
Weight	4300 g