Denon MC6000MK2 Quick Start Guide

# Denon MC6000MK2
Control
Function Shift Function
39 VINYL Toggles between Vinyl/Jog Modes
40 PLAY/PAUSE Play/Pause track
41 CUE Add or Jump to Temporary Cue
42 SYNC Sync On Sync Off (Press twice to return to Absolute
Pitch when in Relative Mode)
43 PITCH FADER Adjust Pitch When in Sync mode, used to disable the Pitch
Fader temporarily and change the zero position
44 PLATTER Adjust/Scratch or Jog Search
45 KEYLOCK Enable Keylock Cycle through available Tempo Range
46 ECHO ON 1/2 Adjust Mic Echo Wet/Dry for Mic Channels
47 DECK LAYER ASSIGN Swap deck layer
48 DUCKING Lowers master signal when pressed down/will stop ducking on release Routes Mic input to the Booth output
49 MIC ON 1/2 Turn on/off MIC channel 1 or 2
50 HOT CUE MODE Activates Hot Cue (1-4)
51 MIC 2 LEVEL KNOB Turn to adjust MIC 2 level
52 MIC 1 LEVEL KNOB Turn to adjust MIC 1 level
NOTE: The SHIFT button is used with other buttons that have shift modier functions.

Denon MC6000MK2 Specifications

General

Mixer section	Yes
Product color	Black, Multicolour
Scratcher type	Vinyl scratcher
Frequency range	20 - 20000 Hz
Output level (XLR)	-60 dBV
Output level (L, R)	24 dBV
Built-in optical drive	-
Equalizer bands quantity	3
Number of mixer channels	4 channels
Signal-to-Noise Ratio (SNR)	84 dB
Number of scratcher platters	2
Number of dedicated effects controls	1
Signal-to-Noise Ratio (SNR) (headphone out)	82 dB
Total Harmonic Distortion plus Noise (THD+N)	0.05 %
Maximum output level (booth, unbalanced, L, R)	4
USB connector type	USB Type-B
Microphone connectivity	XLR
Input voltage	120 - 230 V
Power supply type	AC
Built-in display	No
Bundled software	Serato DJ Intro

Weight and Dimensions

Depth	283.7 mm
Width	460 mm
Height	71.5 mm
Weight	4300 g