Denon PMA-300V - Page 6

ENGLISH
CONNECTIONS
SPEAKER SYSTEM (A)
TURNTABLE
{FOR MC, MM}
These specifications are for the European model.
Speaker impedance
AC OUTLET
@ When the A and B terminal sets are to be used
separately, the speakers that are to be con-
nected should have an impedance of 6 to 16
ohms.
LINE OUT (PB)
LINE IN (REC)
LINE OUT (PB)
LINE 'N (REC)
When the two terminal sets (A + B) are to be
used at the same time, use of speakers whose
impedance is outside the range from 12 to 16
ohms will result in malfunction. Be careful not
to let this happen.
=] Eale=\e)
EE — Fe
Loum Be
VIDEO DECK 2 (Sound out) TAPE DECK 1 TAPE DECK 2
oO
a
9°
°
Connection to the Speaker System
Connect the speaker system for the left channel (the left side as viewed facing the front) to the L speaker
terminal on the back panel, and the speaker system for the right channel to the R terminal.
@ When connecting the speaker terminals to the speaker systems, make certain to connect the polarities
correctly (+ to + and ~ to —).
@ During connection, be careful that the inner wires in the speaker cords do not protrude from the termi-
nals to contact any other terminal, and that the inner wires in the separate speaker cords do not contact
each other.
RIGHT SPEAKER Lerner Connecting the speaker Cords
az
Ae B 5 ~16 chm/SPEAKER
A +B 12~16 obm/ SPEAKER
Lift the lock piece on the termi-
nal to its upright position and
insert the cord. Then reset the
tock,