Need help?Do you have a question about the Denon PMA-30 and is the answer not in the manual?
General| Amplifier class | - |
|---|---|
| Input sensitivity | 70 mV |
| Audio output channels | 2.0 channels |
| Peak power per channel | 40 W |
| Signal-to-Noise Ratio (SNR) | 110 dB |
| Total Harmonic Distortion (THD) | 1 % |
| RMS power output per channel (8 Ohm) | 25 W |
| Pre out port | Yes |
| Digital audio coaxial in | 1 |
| Digital audio optical in | 2 |
| Speakers connectivity type | Clamp terminals |
| Purpose | Home |
| Cooling type | Passive |
| Product color | Black, Silver |
| Volume control | Digital |
| Connectivity technology | Wired & Wireless |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Power consumption (standby) | 0.2 W |
| Power consumption (typical) | 35 W |
Weight and Dimensions| Depth | 240 mm |
|---|---|
| Width | 200 mm |
| Height | 86 mm |
| Weight | 2700 g |
Explains the functions of each button on the remote control for unit operation.
Steps for preparing and connecting speaker cables to the unit.
Instructions for turning the unit on and switching it to standby mode.
How to select digital, analog, or Bluetooth input sources.
Steps required to register Bluetooth devices with the unit.
Methods for connecting Bluetooth devices, including first-time pairing and re-connection.
How to connect multiple Bluetooth devices and switch playback between them.
Step-by-step guide on how to navigate and change settings in the unit's menu system.
Basic checks for connections, operation, and other devices.
Addresses specific problems like power, sound, remote control, and Bluetooth issues.
Solutions for the unit not powering on or turning off unexpectedly.
How to resolve issues where no sound is produced by the speakers.
How to fix problems with distorted audio, interruptions, or unwanted noise.
Solutions for when the desired sound is not produced or speaker output is reversed.
Troubleshooting issues with digital audio input from coaxial or optical sources.
To Next Page
