Need help?Do you have a question about the Denon PMA-60 and is the answer not in the manual?
General| Amplifier class | - |
|---|---|
| Input sensitivity | 70 mV |
| Audio output channels | 2.0 channels |
| Peak power per channel | 50 W |
| Signal-to-Noise Ratio (SNR) | 110 dB |
| Total Harmonic Distortion (THD) | 0.004 % |
| RMS power output per channel (8 Ohm) | 25 W |
| Pre out port | Yes |
| Headphone outputs | 1 |
| USB 2.0 ports quantity | 2 |
| Speakers connectivity type | Clamp terminals |
| Purpose | Home |
| Cooling type | Passive |
| Product color | Black, Silver |
| Volume control | Rotary |
| Remote control type | RC-1220 |
| Connectivity technology | Wired & Wireless |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Power consumption (standby) | 0.2 W |
| Power consumption (typical) | 35 W |
Weight and Dimensions| Depth | 240 mm |
|---|---|
| Width | 200 mm |
| Height | 86 mm |
| Weight | 2700 g |
Detailed steps for connecting speaker cables correctly.
Instructions for using the unit as a computer DAC via USB.
Procedure for connecting the unit to a power source.
Steps to turn the unit on and switch it to standby mode.
Guide to choosing between USB-DAC, Bluetooth, and other inputs.
Detailed steps for playing audio from a computer, including driver installation.
Guide to connecting and playing music wirelessly via Bluetooth.
Solutions for issues related to powering the unit on/off.
Troubleshooting steps for audio output and sound quality problems.
To Next Page
