Need help?Do you have a question about the Denon PMA-A110 and is the answer not in the manual?
General| Input Sensitivity MM | 2.5 mV / 47 kOhm |
|---|---|
| Treble Control | ±8 dB at 10 kHz |
| Bass Control | ±8 dB at 100 Hz |
| Standby Consumption | 0.2 W |
| Dimensions | 434 x 182 x 450 mm |
| Total Harmonic Distortion | 0.007% |
| Frequency Response | 5 Hz - 100 kHz |
| Input Sensitivity MC | 200 µV / 100 ohm |
| Power Output (8 Ohm) | 80 W (20 Hz - 20 kHz, THD 0.07%) |
Important safety precautions to follow before and during use.
Identifies and describes front panel controls and indicators.
Diagram showing all rear panel connection ports.
Safety and impedance notes for speaker connections.
Step-by-step guide for connecting speaker cables.
Requirements for connecting a PC/Mac and driver installation.
Steps to turn the unit on/off or to standby.
How to choose input source and control volume.
Specifies OS and USB requirements for PC/Mac connection.
Procedure for installing the driver software.
Steps for wizard navigation and license agreement.
Initiating and completing the driver installation process.
Completing wizard and connecting unit/PC via USB.
Verifies driver installation in sound settings.
Steps to check audio output from USB-DAC.
Advanced settings and sample rate/bit depth.
Applying and testing the audio configuration.
Connecting unit and Mac, accessing Audio MIDI Setup.
Ensuring correct sound output device is selected.
Selecting USB-DAC input for playback.
First steps to check when a problem arises.
Troubleshooting power on/off and auto standby.
Troubleshooting specific power indicator error codes.
Troubleshooting no sound, speaker problems, and stereo reversal.
To Next Page
