Denon PMA-A110 - Verifying Driver and Audio Output; Checking Driver Status; Checking Audio Output Functionality

6
Press X on this unit.
0
When the unit power is turned on, the PC automatically finds and
connects to the unit.
7
Press INPUT SELECT to switch the input source to
“USB-DAC”.
8
Checking the installed driver.
A
Click the “Start” button and click “Control Panel” on the PC.
0
The control panel setting list is displayed.
B
Click “Sound”.
0
The sound menu window is displayed.
C
Check that there is a checkmark next to “Default Device” under in
“PMA-A110” of the “Playback” tab.
0
When there is a checkmark for a different device, click “PMA-
A110” and “Set Default”.
9
Checking audio output.
Outputs a TEST signal from the PC and checks the audio output
from the USB-DAC function.
A
Select “PMA-A110” and click “Properties”.
0
The Properties window is displayed.
.
q
PMA-A110
Contents
Connections Playback Settings Tips Appendix
33
Front panel Rear panel
Remote control
unit
Index