Connecting a PC or Mac
By connecting a computer to the USB-DAC port on the rear panel of this unit using a commercially available USB connecting cable, this unit can be used
as a D/A converter. (v p. 28)
NOTE
0
Before USB connecting this unit to your computer, install the driver software in your computer. (v p. 29)
0
Download the driver software from the PMA-A110 page of the Denon website.
0
Use a cable that is 3 m or less to connect to the computer.
.
Ty p e A
USB 2.0 cable
(Sold separately)
Ty p e B
Computer on which the driver software and audio
player software are installed
Contents
Connections Playback Settings Tips Appendix
20
Front panel Rear panel
Remote control
unit
Index
To Next Page
Loading...
