Selecting the input source
o
Selecting USB-DAC, DIGITAL IN or ANALOG IN
1
Press q to select the input source to be played.
The following icon appears on the display.
.
USB-DAC: Plays back audio on the computer.
.
COAXIAL:
Plays back the device connected to the
COAXIAL connector.
.
OPTICAL-1:
Plays back the device connected to the
OPTICAL 1 connector.
.
OPTICAL-2:
Plays back the device connected to the
OPTICAL 2 connector.
.
AUX:
Plays back the device connected to the
AUX connector.
0
You can also use INPUT SELECT df on the remote control unit for this operation.
o
Selecting Bluetooth
1
Press V.
The following icon appears on the display.
.
Bluetooth:
Connects and plays back a Bluetooth
device.
0
You can also press V on the remote control unit for this operation.
Contents Connections Playback Settings Tips Appendix
28
Front panel Display Rear panel Remote Index
To Next Page
Loading...
