Denon PMA-60 - Connecting to a Computer (USB-DAC)

Connecting a PC or Mac
By connecting a computer to the USB-DAC port on the rear panel of this unit using a commercially available USB connecting cable (supplied), this unit
can be used as a D/A converter. (v p. 30)
NOTE
0
Before USB connecting this unit to your computer, install the driver software in your computer. (v p. 31)
0
Download the driver software from the PMA-60 page of the Denon website.
0
Use a cable that is 3 m or less to connect to the computer.
.
Type A
Type B
Computer on which the driver software and audio
player software are installed
USB 2.0 cable
(supplied)
Contents
Connections Playback Settings Tips Appendix
22
Front panel Display Rear panel Remote Index