Denon PMA-60 - Listening via Analog AUX Connection

o
Audio signals that can be played back
See “D/A Converter” (v p. 63).
NOTE
0
Do not input non-PCM signals, such as Dolby Digital and DTS. This causes noise
and could damage the speakers.
Listening to music via a analog
connection (AUX)
1
Press q to switch the input source to “AUX”.
2
Play back music on the connected device.
The speakers output music from the connected device.
Contents Connections Playback Settings Tips Appendix
40
Front panel Display Rear panel Remote Index