To Next PageTo Next Page
Need help?Do you have a question about the Denon PMA-320A and is the answer not in the manual?
Controls the power supply to the unit.
Selects the program source for playback.
Adjusts the overall audio output level.
Controls tape recording and playback monitoring.
Allows connection of headphones for private listening.
Selects speaker systems A, B, or both.
Adjusts the low-frequency response of the audio.
Adjusts the high-frequency response of the audio.
Adjusts the sound level between left and right channels.
Enhances low and high frequencies at low volumes.
Bypasses circuitry for direct CD signal input.
Filters out low-frequency rumble and vibrations.
Selects sensitivity for different phono cartridge types.
Initial setup and connection checks before use.
Ensures all audio and speaker connections are proper.
Initial adjustment of volume, tone, and loudness controls.
Steps for playing vinyl records via the PHONO input.
Instructions for playing a CD player connected to the CD input.
Steps for tuning into and listening to radio broadcasts.
Instructions for playing a CD player using CD DIRECT.
Connecting other audio devices to AUX inputs.
How to play back tapes using the MONITOR/COPY switch.
Procedures for recording audio sources onto tape.
Steps for dubbing tapes between two decks.
How to listen to recordings in progress.
Information about the unit's protective circuit.
Specifications for the amplifier's power output and distortion.
Specifications for pre-amplifier output, sensitivity, and impedance.
General specifications including signal-to-noise ratio and tone control range.
Power supply, consumption, dimensions, and weight specifications.
List of international service locations for consultation and repair.
General
