Denon PMA-30 - Selecting Input Source; Input Source Selection Methods

Selecting the input source
o
Selecting DIGITAL IN or ANALOG IN
1
Use INPUT SELECT df to select the input source to be
played.
The following icon appears on the display.
.
COAXIAL:
Plays back the device connected to the
COAXIAL connector.
.
OPTICAL-1:
Plays back the device connected to the
OPTICAL 1 connector.
.
OPTICAL-2:
Plays back the device connected to the
OPTICAL 2 connector.
.
AUX:
Plays back the device connected to the
AUX connector.
0
You can also press q on the main unit for this operation.
o
Selecting Bluetooth
1
Press V.
The following icon appears on the display.
.
Bluetooth:
Connects and plays back a Bluetooth
device.
0
You can also press V on the main unit for this operation.
Contents Connections Playback Settings Tips Appendix
26
Front panel Display Rear panel Remote Index