Denon PMA-500V - Denon PMA-500 V Technical Specifications

SPECIFICATIONS
= POWER AMPLIFIER SECTION
Rated Output Power:
Total Harmonic Distortion:
Input Sensitivity:
Input Impedance:
w EQUALIZER AMPLIFIER SECTION
Equalizer Amplifier Output:
(REC OUT Terminal)
Input Sensitivity/Input Impedance:
RIAA Deviation:
Maximum input Voltage:
@ OVERALL CHARACTERISTICS
SN Ratio (IHFA Network):
Tone Control Adjustable Range:
Filtering Characteristics:
Loudness Characteristics:
AC OUTLET:
(For U.S.A., Canada and Asia)
POWER SOURCE:
POWER CONSUMPTION:
DIMENSIONS: ro
WEIGHT:
ENGLISH
Both channel drives (TUNER > SP OUT)
80 Watts minimum rms per channel
(8 ohm Load) with less than 0.05% total
harmonic distortion from 20 Hz to 20 kHz.
1 kHz (4 ohm Load) 130 W + 130 W (DIN, T.H.D 1%)
0.007% (20 Hz — 20 kHz at —3 dB rated output 8 ohm Load)
0.003% 1 kHz (at rated output 8 ohm Load)
150 mV
30 k ohm
Rated Output: 150 mV.
PHONO MM 2.5 mV 47 k ohm
“MC 200nV 100 ohm
CD, VIDEO-1, VIDEO-2, TUNER/AUX, TAPE
150mV 47 kohm
within +0.2 dB
(20 Hz — 20 kHz) ;
within +0.3 dB
(20 Hz — 50 kHz)
160 mV/1 kHz
12 mV/1 kHz
PHONO MM
MC
PHONO MM
MC
PHONO MM_ 88 dB (input terminals short-circuited for
5 mV input)
68 dB (input terminals short-circuited for
500 xuV input)
TUNER/AUX, CD, TAPE, VIDEO-1, VIDEO-2
105 dB (input terminals short-circuited)
MC
BASS 100 Hz +10 dB
TREBLE 10 kHz +10 dB
SUBSONIC 16 Hz, 12 dB/oct
Low frequency 100 Hz +7 dB
High frequency 10 kHz + 6 dB
SWITCHED x 2, 100 W (Total)
UNSWITCHED x 1, 250 W
Germany and France AC 220 V, 50 Hz; U.K. and Australia
AC 240 V, 50 Hz; U.S.A. and Canada AC 120 V, 60 Hz;
Asia 110/120/220/240 V, 50/60 Hz (Multiple)
3.4A or 170 W (U.S.A.);3.4A (Canada); 190 W (IEC); 150 W
(Multiple)
434 mm (17-3/32”)W x 137 mm (5-25/64’")H x
385 mm (15-5/32”)D ;
(including rubber feet, control knobs, and terminals.)
9.4 kg (20 Ibs 12 oz) (For U.S.A. & Canada)
9.7 kg (21 Ibs 7 oz) (For Europe, Multiple and Australia Version)
Design and specifications are subject to change without prior notice.