Do you have a question about the Denon PMA-725R and is the answer not in the manual?
Speaker load impedance | 4 - 16 ohms |
---|---|
Power Output | 50W per channel (8 ohms, 20Hz-20kHz, THD 0.07%) |
Total Harmonic Distortion (THD) | 0.07% (rated output) |
Input Sensitivity | 150mV (line) |
Dimensions | 434 x 120 x 285mm |
Frequency Response | 5Hz-100kHz (+0, -3dB) |
Essential safety warnings and precautions for operating the amplifier safely.
Guidelines for proper usage, handling, and placement of the unit.
Detailed description of all front and rear panel controls and their functions.
Instructions for operating the amplifier using the remote control unit.
Specifications of the amplifier's performance and electrical characteristics.
Procedures for removing sections and explanation of new circuit functionality.
Procedures for adjustments and block/level diagram overview.
Identification of ICs, transistors, and diodes used in the unit.
Detailed lists of all components for PWB and exploded views.
Visual breakdown of assembly and internal wiring connections.
Detailed electrical schematics of the amplifier's circuits.