A
Power operation button (X)
This turns the power on/off (standby). (v p. 32)
B
Power indicator
This is lit as follows according to the power status:
0
Green: Power on
0
Off: Normal standby
0
Red:
0
When “Network Control” is set to “On” (v p. 68)
0
When “Auto-Play” is set to “On” (v p. 65)
0
Red (blinking):
0
When the protection circuit is activated (v p. 99)
C
Remote control sensor
This receives signals from the remote control unit. (v p. 7)
D
SPEAKERS button
This selects the speaker for audio output. (v p. 33)
E
SPEAKERS indicator
This is lit as follows, according to the speaker output setting.
0
SPEAKERS A: Green
0
SPEAKERS B: Green
0
SPEAKERS A+B: Green
0
Speaker output off: Off
F
SOURCE DIRECT button
This turns source direct mode on/off. (v p. 59)
G
SOURCE DIRECT indicator
This is lit as follows according to the source direct status.
0
Source direct mode on: Green
0
Source direct mode off: Off
H
MC/MM button
Switch between MM or MC to match the type of cartridge used in the
record player connected to this unit.
I
MC/MM indicator
This is lit as follows according to the setting of the phono equalizer of
this unit:
0
MC: Green
0
MM: Off
Contents
Connections Playback Settings Tips Appendix
9
Front panel Rear panel
Remote control
unit
Index
To Next Page
Loading...
