EasyManua.ls Logo

Denon PMA-SA1 - Specifications

Denon PMA-SA1
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
POWER AMPLIFIER SECTION
Rated Output Power: Both channel driven (CD-1 SP OUT)
50 W + 50 W (8 /ohms load, 20 Hz ~ 20 kHz with 0.07 % T.H.D.)
100 W + 100 W (4 /ohms load, 1 kHz with 0.7 % T.H.D.)
Total Harmonic Distortion: 0.007 % (–3 dB at rated output) 8 /ohms load, 1 kHz
Output terminals: Speaker load 4 ~ 16 /ohms
PRE AMPLIFIER SECTION
PHONO EQUALIZER
Rated Output: 150 mV
(REC OUT terminal)
Input Sensitivity/Input Impedance:
PHONO (MM) :2.5 mV/47 k/kohms
CD-1, CD-2, TUNER,
DVD/AUX,
TAPE-1/CD-R, 105 mV/47 k/kohms
TAPE-2/MD
BALANCED :105 mV/100 k/kohms
RIAA Deviation: PHONO :20 Hz ~ 20 kHz ±0.3 dB
OVERALL CHARACTERISTICS
SN Ratio (IHF A Network): PHONO (MM) :88 dB (input terminals short-circuited, 5 mV input signal)
CD-1, CD-2, TUNER,
DVD/AUX,
TAPE-1/CD-R, 105 dB (input terminals short-circuited)
TAPE-2/MD,
BALANCED
OTHERS
Power Supply: AC 230 V, 50 Hz
Power Consumption: 230 W (IEC)
Dimensions: 434 (W) x 181 (H) x 508 (D) mm (including feet, controls and terminals)
Mass: 30.0 kg
13
ENGLISH
6
SPECIFICATIONS
Maximum dimensions include controls, terminals, and covers.
(W) = width, (H) = height, (D) = depth
For improvement purposes, specifications and functions are subject to change without advanced notice.
ENGLISH

Table of Contents

Related product manuals