Denon RCD-M41 User Manual (English)

Other manuals for Denon RCD-M41

Questions and Answers:

R
ryanmonroeJul 28, 2025
Why is my Denon RCD-M41 Car Receiver remote control not working?
- J
  Joseph ArmstrongJul 28, 2025
  If the Denon Car Receiver's remote control isn't working, there are several potential causes. First, try replacing the batteries with new ones. Ensure that you are within 23 ft/7 m of the unit and within a 30° angle. Remove any obstacles blocking the signal between the remote and the receiver. Also, verify that the batteries are inserted correctly, matching the q and w marks. Strong light, like direct sunlight or certain fluorescent bulbs, can interfere with the remote sensor; try moving the unit to a location with less intense light. Finally, if you're using a 3D video device, adjust the direction and distance of those units to prevent infrared communication interference.
K
Kim SmithAug 4, 2025
What to do if the remote control for my Denon Car Receiver is not working?
- B
  Barbara KellyAug 4, 2025
  If your Denon Car Receiver remote control isn't working, start by checking and replacing the batteries. Make sure the remote is within a 23 ft/7 m range and 30° angle of the receiver. Clear any obstructions blocking the signal. Verify the batteries are correctly oriented, matching the q and w marks. If strong light is affecting the sensor, relocate the unit. For 3D video devices, adjust their position to avoid infrared interference.
J
Judith AlvarezAug 11, 2025
How to fix a Denon RCD-M41 remote control that is not working?
- E
  elizabeth96Aug 11, 2025
  If the remote control for your Denon Car Receiver isn't working, the batteries might be the issue. Try replacing them. Also, ensure you're within 23 ft/7 m and a 30° angle of the receiver. Obstacles can block the signal, so remove them. Double-check that the batteries are inserted correctly, aligning with the q and w marks. Strong light can interfere with the sensor, so move the unit if necessary. If you're using a 3D video device, adjust its position to prevent infrared conflicts.
T
Tina AguilarAug 18, 2025
Why is my Denon RCD-M41 Car Receiver remote not responding?
- M
  Melanie GarciaAug 19, 2025
  There are several reasons why the remote control for your Denon Car Receiver might not be working. Begin by replacing the batteries. Confirm that you are within 23 ft/7 m and a 30° angle of the unit. Ensure there are no obstructions blocking the signal. Verify the batteries are properly inserted, paying attention to the q and w marks. If the remote sensor is exposed to strong light, relocate the unit. If you're using a 3D video device, adjust its positioning to avoid infrared communication issues.

Denon RCD-M41 Specifications

General

Radio type	Portable
Tuner type	Digital
FM band range	87.5 - 108 MHz
Supported radio bands	FM
Radio Data System (RDS)	Yes
Display type	LED
Thermometer	-
Product color	Silver
Volume control	Rotary
Power source	AC
Input frequency	50 / 60 Hz
AC input voltage	230 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	70 W
USB port	No
RMS rated power	- W
Type	Home audio mini system
Audio formats supported	MP3
Impedance	6 Ω
Speaker type	2-way
Frequency range	45 - 40000 Hz
Woofer diameter	120 mm
Tweeter diameter	25 mm