Why is a specific part of a disc not playing on my Denon Receiver?
If a specific part of a disc isn't playing on your Denon Receiver, the disc may be dirty or scratched. Wipe the disc clean or replace it.
What to do if my Denon Receiver power turns off suddenly and the POWER indicator flashes red (2 second intervals)?
The protection circuit may have been activated because of a rise in internal temperature. Turn off the power, wait for the set to fully cool down, then turn the power back on. Also, ensure the set is in a well-ventilated location.
Why does my Denon Receiver power off suddenly and POWER indicator flashes red (0.25 second intervals)?
Turn off the power and contact a DENON service center.
What to do if my Denon Receiver display is lit but no sound is produced?
There are several reasons why your Denon Receiver might have a lit display but no sound: * The input source may be incorrect; select the appropriate input source. * The volume control may be set too low; turn the volume up. * MUTING may be activated; switch off MUTING.
Why can't my Denon Receiver play a CD-R or CD-RW disc?
If your Denon Receiver can't play a CD-R or CD-RW disc, it may not have been finalized. Finalize the disc, then try playing it. Alternatively, the recording conditions may be poor, or the disc quality might be lacking, so use a properly recorded disc.
What to do if my Denon Car Receiver displays 'No Network Connection'?
If your Denon Car Receiver displays 'No Network Connection', it means the network is not properly set up. Perform 'Network First Setup'. Alternatively, select a source other than the network function.
What to do if my Denon Car Receiver display is off?
If the display on your Denon Car Receiver is off, check the Dimmer setting. If it's set to “OFF,” change it to something other than “OFF.”
What to do if my Denon Car Receiver display is not lit and no sound is produced when power is switched on?
If the display isn't lit and no sound is produced when you turn on your Denon Car Receiver, the power cord may not be plugged in securely. Check the connections on the set's rear panel and the connection of the power plug to the power outlet.
How to fix 'Server is not found' or connection issues on my Denon Receiver?
If your Denon Receiver displays 'Server is not found' or has connection issues, check the computer’s or router’s firewall settings. Ensure the computer is powered on and the server is running. Also, verify the set’s IP address.
Why does my Denon Receiver not operate properly?
The set may not operate properly because external noise or interference is causing the set to malfunction. Reset the microprocessor.
General| Frequency range | 5 - 20000 Hz |
|---|---|
| RMS rated power | 65 W |
| Pre-out channels | 1 SW |
| Input sensitivity | 200 mV |
| Pre-out connectivity | Yes |
| Audio output channels | 2.0 channels |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Total Harmonic Distortion (THD) | 0.7 % |
| Dynamic power per channel (4 Ohm) | 80 W |
| Power output per channel (20-20KHz@8 Ohm) | - W |
| Audio (L/R) in | 2 |
| Digital audio optical in | 1 |
| Headphone connectivity | 3.5 mm |
| Connectivity technology | Wired & Wireless |
| Speakers connectivity type | Binding post |
| Audio formats supported | AAC, FLAC, MP3, WMA |
| Image formats supported | JPG |
| Video formats supported | AVI, WMV |
| AM band range | 522 - 1611 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Preset stations quantity | 99 |
| Internet radio services supported | Last.fm, Napster |
| Optical drive type | CD player |
| Disc types supported | CD, CD-R, CD-RW |
| Display | OLED |
| Product color | Silver |
| Audio decoders | Not supported |
| Volume control | Rotary |
| Apple docking compatibility | iPhone, iPod |
| Number of products included | 1 pc(s) |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Power consumption (standby) | 0.4 W |
Weight and Dimensions| Depth | 299 mm |
|---|---|
| Width | 280 mm |
| Height | 112 mm |
| Weight | 4300 g |
Warning about opening the unit to avoid electric shock hazard.
Warning to prevent fire or electric shock by avoiding rain or moisture.
Various warnings and precautions for product usage and handling.
Safety precautions related to antenna placement and co-location.
Provides important precautions for handling the unit and its power.
How to tune into stations, auto-preset FM, and name presets.
How to connect and play music from an iPod.
Steps for connecting and playing files from USB devices.
How to operate internet radio and play files from a music server.
How to operate music servers and listen to Last.fm stations.
Steps to access and play music from the Napster service.
Detailed steps to access and play internet radio stations.
Procedures for auto/manual clock setting, time zones, and daylight saving.
Steps for connecting to a network via a wired Ethernet cable.
How to set up, start, and cancel party mode, and join as attendee.
Procedure for checking and updating the unit's firmware.
To Next Page
