Denon RCD-N7 - Other Network

32
ENGLISH
Other Network
n Network Standby
Set the network function On/Off during standby.
1
Press [MENU].
Turns on the Menu settings mode and the Menu appears on
the display. (vpage25 “Menu map”)
2
Use ui to select “Network” – “Other Network”
– “Network Standby”, then press [ENTER], <1/3
ENTER > or p.
“Network Standby” menu appears.
3
Use ui to “On”, then press [ENTER], <1/3
ENTER > or p.
On
: Shortens the time before the network connection is
completed.
• Power consumption during the standby mode will be
higher. (Power consumption: 3 W)
• Network standby mode is set and the power indicator
lights red.
Off
: Power consumption during the standby mode will be
minimized. (Power consumption: 0.3 W)
• It will take slightly longer till the network connection is
completed.
• This is the default setting.
n PC Language
Select computer environment language.
1
Press [MENU].
Turns on the Menu settings mode and the Menu appears on
the display. (vpage25 “Menu map”)
2
Use ui to select “Network” – “Other Network” –
“PC Language”, then press [ENTER], <1/3 ENTER >
or p.
“PC Language” setting menu appears.
3
Use ui to select your computer environment
language, then press [ENTER], <1/3 ENTER > or p.
n Friendly Name Edit
The Friendly Name is the name of this unit displayed on the
network.
1
Press [MENU].
Turns on the Menu settings mode and the Menu appears on
the display. (vpage25 “Menu map”)
2
Use ui to select “Network” – “Other Network” –
“Friendly Name Edit”, then press [ENTER], <1/3
ENTER > or p.
“Friendly Name Edit” menu appears.
3
Edit a friendly name.
For the character input method, see “Inputting characters”
(vpage34)
n Network Status
Displays up to a maximum of 10 DENON products connected on
the same network.
• Friendly Name / Party Mode Status / Model Name /
Power ON / Standby / Select Source / Volume Level
Button located on both the main unit and the remote control
BUTTON
Button only on the main unit <BUTTON>
Button only on the remote control [BUTTON]
Symbols used to indicate buttons in this manual
u
p
[ENTER]
[MENU]
i
/&5803,$%3&$&*7&33$%/
p i
<1/3 ENTER>
u
Setting the network [Network]
1.RCDN7E2ENG5th0831.indd321.RCDN7E2ENG5th0831.indd32 2010/09/0115:10:042010/09/0115:10:04