6
3. Safety instructions
Caution Read through the instructions for installing and operating the unit carefully before
switching it on.
3.1. Correct use
The induction casting machine megapuls compact is designed solely for use in dental laboratories for
melting all conventional dental metal alloys, excluding titanium and titanium alloys, and then casting by means of
centrifugal force. Any other use or related improvisation of the machine is regarded as misuse. The company
Dentaurum, GmbH & Co. KG is not liable for damage resulting from misuse.
Correct operation also includes following these instructions for use carefully and making sure machine inspection
and maintenance is carried out on a regular basis.
When a Dentaurum product is finally no longer in use the disposal regulations of that particular country apply.
Dentaurum or the dental trade is available to answer questions regarding the correct disposal of any specific
product.
3.2. Hazard warning symbols
In the instructions for use, the following warning symbols were used:
Warning Suggests possible danger to life or health of persons.
Ignoring this warning may result in serious harm to health or even fatal injury.
Caution Suggests a possibly dangerous situation.
Ignoring this warning may result in slight personal injury or damage to equipment .
i
Note General information regarding the machine.
3.3. Warranty and liability
Our general terms for sale and delivery apply. Warranty and liability to persons or machinery is not applicable when
attributable to one or more of the following points:
• Incorrect operation, use, assembly and maintenance of the machine
• Misuse of the machine
• Operation of the machine despite defect safety fixtures or incorrectly fitted or faulty safety and protective
precautionary measures
• Failure to follow the advice in the instructions for use regarding transport, storage, assembly, operation and
maintenance of the machine
• Failure to monitor working parts
• Personally conducted alterations to the build of the machine
• Unauthorized repairs.
3.4. Owner responsibility
The owner may only permit those persons to use the machine who
• Have been trained to use the machine and are familiar with the safety precautions
• Have read and understood the safety advice and instructions for use
• Have been instructed in the relevant accident prevention precautions.
To Next Page
Loading...