Professional LED Light System for All of Surgery Application
5
2. Warning
The instructions given in this document must be followed when handling the
product. Failure to do so may endanger the safety of the installers or users.
As well as specific information on operating the entire product and conducting
preventive maintenance, are provided in the USER’S MANUAL. For further
information, please contact our sales network or our local network.
The electrical connections must be performed by a qualified technician only.
The Lithium Battery replacement must be performed by a qualified technician only.
The electrical installation must be planned, performed and inspected by electrical
engineers.
The LIGHTHEAD is designed to operate using a AC 100-240V, 50/60Hz. Higher or
lower voltages may affect the light intensity and operating life of the LEDs.
Damaged wire insulation may result in the risk of electric shock.
To protect against the risk of electrocution, connect the power cables carefully.
Major Surgical Luminaire(LUVIS L200) is class I equipment. In order to avoid the risk
of an electric shock, the equipment must be connected to a mains supply with
PE(protective earth).
A main control switch must be installed for turning the system power-off.
The power supplies may be installed and connected only by an electrician or a
DENTIS authorized service agent.
This product may only be repaired and special assembly work may only be carried
out by DENTIS or a company that has been authorized by DENTIS.
Check the polarity of all electrical connections before turning on the power.
To Next Page