Need help?Do you have a question about the Dentsply Sirona CEREC SpeedFire and is the answer not in the manual?
General| Type | Sintering Furnace |
|---|---|
| Temperature Range | Up to 1600°C |
| Cooling Rate | Controlled cooling |
| Category | Medical Equipment |
| Manufacturer | Dentsply Sirona |
| Model | CEREC SpeedFire |
| Milling Time | Not applicable |
| Milling Bur Options | Not applicable |
| Material Compatibility | Zirconia |
| Firing Time | Approx. 10-15 minutes |
| Power Supply | 50/60 Hz |
| Connectivity | USB |
Welcome message, contact details, and manufacturer address.
Guidance on using the manual, understanding its structure, and danger levels.
Defines manual scope, warranty, liability, and proper unit usage.
Explanation of symbols and markings found on the unit and packaging.
Covers prerequisites, maintenance, modifications, accessories, and damage.
Instructions for connecting the unit, external equipment, and patient environment.
Covers ventilation slots and product-specific safety instructions like operation and burn risks.
Guidelines for handling and disposing of insulating material in the furnace chamber.
Identifies unit parts and explains various system symbols and menu functions.
Lists certifications, technical specifications, and electromagnetic compatibility details.
Instructions for inspecting, unpacking, repacking, and listing delivery contents.
Guidance on installation site, power/network connection, WLAN, and unit configuration.
Steps for switching unit ON/OFF, handling door insulation, and initial setup.
Instructions for manual unit search, removal, and initial startup configuration.
Overview of startup screen, job list, multi-select, and selecting/starting processes.
Instructions for loading the furnace with restorations for the sintering process.
Steps to initiate the glazing process, including warnings and loading for glazing.
Procedure for glazing spray application, restoration prep, and IPS e.max CAD process.
Instructions for VITA SUPRINITY PC process and using the fireproof tray with fan.
Handling furnace insulation material and replacing main fuses.
Instructions for replacing the filter and list of approved cleaning/disinfecting agents.
Details on temperature testing procedures and unit calibration by service engineers.
Guidelines for environmentally friendly disposal of old electrical and electronic devices.
To Next Page
