What to do if AC IN lamp does not light on DENTSPLY X-SMART Endo Motor Dental equipment?
If the AC IN lamp on your DENTSPLY Dental equipment isn't lighting up, start by checking the AC adapter connection to ensure it's properly plugged into both the device and a working outlet. If the connection is good, the issue might be with the internal or AC adapter fuse. In this case, contact the Technical Service Department.
Why DENTSPLY X-SMART Endo Motor Dental equipment battery charger does not work?
The battery charger on your DENTSPLY Dental equipment may not work due to several reasons. Ensure batteries are inserted correctly. If they are already fully or nearly fully charged, the charger won't engage. Low battery temperature can also prevent charging, so try charging in a warmer room, being careful of moisture. If the battery temperature is too high, contact the Technical Service Department.
What to do if the motor handpiece does not rotate on DENTSPLY X-SMART Endo Motor?
If the motor handpiece on your DENTSPLY Dental equipment isn't rotating, first check that the motor handpiece cord is properly connected. Also, verify the foot pedal (if optional) is connected correctly. If both connections are secure and the handpiece still doesn't rotate, there may be a break in the motor handpiece or its cord, and you should contact your Technical Service Department.
Why does the alarm sound and the motor handpiece not rotate when turning on DENTSPLY X-SMART Endo Motor Dental equipment?
If the alarm sounds and the motor handpiece fails to rotate when powering on your DENTSPLY Dental equipment, it could be due to the power button being pressed during startup, in this case contact your Technical Service Department. Alternatively, the foot pedal might be pressed, so check the foot pedal (if optional). A short circuit inside the foot pedal can also cause this issue, and you should contact your Technical Service Department.
How to fix a motor handpiece that does not rotate on DENTSPLY Dental equipment because the contra-angle head is clogged?
If the motor handpiece on your DENTSPLY Dental equipment isn't rotating because the contra-angle head is clogged, try cleaning or replacing the contra-angle head. If the issue persists, there might be a short circuit inside the motor handpiece or its cord, and you should contact your Technical Service Department.
What to do if the motor handpiece keeps rotating and the foot pedal does not react on DENTSPLY X-SMART Endo Motor Dental equipment?
If the motor handpiece continues to rotate and the foot pedal isn't responding on your DENTSPLY Dental equipment, stop the rotation using the power button.
General| Brand | DENTSPLY |
|---|---|
| Model | X-SMART Endo Motor |
| Category | Dental equipment |
| Language | English |
Guidelines for proper use, safety warnings, and situations to avoid.
Explanation of control panel buttons, LCD display, and key features.
Steps for installing files, preparing the device, and operating controls.
Proper lubrication and autoclave sterilization of the contra-angle head.
List of error codes, their causes, and remedies.
Solutions for issues with power, charging, and AC adapter.
Solutions for issues with motor handpiece operation.
To Next Page
