Need help?Do you have a question about the Denver Instrument Tl-series and is the answer not in the manual?
General| Brand | Denver Instrument |
|---|---|
| Model | Tl-series |
| Category | Scales |
| Language | English |
Instructions for safely removing the balance and accessories from packaging.
Guidelines for selecting a suitable work area and environment for the balance.
Instructions for leveling the balance using its adjustable feet and a bubble level.
Guidance on connecting the power adapter and initial startup sequence.
Recommendation to allow the balance to warm up for stable performance.
Instructions for installing balance weigh pans, including model-specific details.
Explanation of display indicators like Stability Indicator and Weigh Units.
Details the function of the Zero key, Soft keys, and Display On/Off key.
Guide to navigating balance functions and setup options using soft keys.
Description of the dynamic fine range feature for specific balance models.
Overview of various weighing modes like basic, animal, statistics, and count.
Details on setting parameters for weighing unit, environment, and serial interface.
Instructions on using soft keys and Next/Enter for menu selection.
Table listing permissible calibration weights for different balance models.
Step-by-step guide for performing external calibration using a mass standard.
Instructions for manual calibration, emphasizing careful entry of weight values.
Procedure to subtract the weight of a container before weighing a sample.
Guide to selecting and toggling between two resident weigh units.
Instructions for setting custom units with multiplication factors.
Steps to turn on the statistics function to begin storing weights.
Procedure for storing individual weights into the balance memory.
Steps to list and scroll through all stored weights in memory.
Instructions for editing or removing weights from the statistics memory.
Guide to calculating various statistical measures like mean, max, min, etc.
Procedures for printing all calculations or individual statistical results.
Steps to clear all stored weights from the balance memory.
Instructions for disabling the statistics function.
Description of environmental settings like Filter, Stability Speed, and Sensitivity.
Steps to access and change environmental settings.
Procedure to change the balance's filter setting.
Procedure to change the balance's stability speed setting.
Procedure to change the balance's stability sensitivity.
Procedure to change the balance's autozero setting.
Details on stability speed and sensitivity settings for animal weighing.
Steps to activate the animal weighing mode.
How to adjust stability speed within the animal weighing mode.
How to adjust stability sensitivity within the animal weighing mode.
Steps to deactivate the animal weighing mode.
Guide to performing piece counting by weighing a known number of items.
Instructions for determining piece count using average piece weight.
Steps to deactivate the count mode.
Procedure for setting low and high limits for check weighing.
Steps to set a target weight for percent-based check weighing.
Steps to save custom parameter settings for different users.
Procedure to recall saved user profiles and their associated settings.
Instructions for setting the current date and time on the balance.
How to set a sample type name for GLP documentation.
Procedure to set the starting sequence number for printouts.
Explains different print modes (Manual, Stable, Interval).
Chart showing sample output formats for analytical balances.
Chart showing sample output formats for toploading balances.
List of available baud rates for serial communication.
Diagram showing the pin configuration for the serial port.
Steps to change the balance's print mode.
Options for customizing the printout format.
Procedure to set up custom print formats, including adding data fields.
Steps to change the serial port baud rate.
Procedure to change serial port bits and parity settings.
Steps to change the serial port echo setting.
Procedure to change the serial port handshake setting.
Steps to automatically store tare weights by weighing containers.
Procedure to manually enter tare weights for storage.
Steps to select and apply a previously stored tare weight.
Procedure to print a list of stored tare weights.
Steps to clear all or selected stored tare weights.
Steps to activate the batch weighing mode.
Step-by-step guide for performing a sequence of weighings in batch mode.
Steps to deactivate the batch weighing mode.
Steps to view the balance's software version.
Procedure to display the balance's serial number (ID).
Steps to view the date, time, and weight of the last calibration.
Procedure to print the balance's calibration data.
Steps to access secured routines using a password.
Steps to set a password to protect balance configuration.
Procedure to remove password protection from the balance.
Step-by-step guide for calculating specific gravity using two weighings.
Steps to deactivate the specific gravity calculation mode.
Procedure to reset the balance to its original factory default settings.
A list of default settings for various balance parameters.
Troubleshooting steps for a blank display screen.
Troubleshooting for when the display shows 'OVER' (over capacity).
Steps for when the weight display is unstable or erratic.
Troubleshooting for inaccurate weight readings.
Solution for adjusting display contrast.
Reference for serial commands for controlling the balance.
Reference for additional serial commands for controlling the balance.
Reference for further serial commands for controlling the balance.
Definitions of additional terms used in the manual.
To Next Page