Remove old or discharged batteries from the product. Remove the batteries when the product will not
be used for extended periods of time to prevent damage due to rusted or corroded batteries.
Never throw batteries into a fire, do not expose batteries to fire or other heat sources.
Battery Disposal: Old or discharged batteries must be properly disposed of and recycled in compliance
with all applicable laws. For detailed information, contact your local solid waste authority.
Follow the battery manufacturer’s safety, usage, and disposal instructions.
OPERATION
Press the Power button to turn the unit on.
IN DAB MODE
Press the DAB/FM/AUX/BT button to select DAB radio mode
Auto select : Press the SCAN button, “SCANNING” will show on the display, and the number of DAB
station will shown on the upper right corner, and it will automatically play the first station. Tune and
press the TUNE/SELECT knob to choose the next or previous station.
Manual select: Press and hold the INFO button and tune the “TUNE/SELECT” knob until the “MANUAL
TUNE” icon shown on the display, then tune the TUNE/SELECT knob to choose the station.
Note: you many have to wait for the unit to tune in to the new channel.
DAB Radio stations presetting:
To receive the desired DAB station, press and hold the PRESET button, “Preset Store” “<1: (Empty)>
will appear on the display,
Tune the TUNE/SELECT knob to choose your desired program number (1-10) you want stored to.
Then press TUNE/SELECT knob to store it.
Repeat the same procedures until all the desired radio stations were stored into the program list.
Recall the memory, press PRESET button and tune the TUNE/SELECT knob to select the stored radio
station as desired. Press the TUNE/SELECT knob toconfirm.
IN FM MODE
Press the DAB/FM/AUX/BT button to select FM radio mode, press the SCAN button, when a radio is
found, the frequency on display will stop running and start playback automatically.
If reception is no good, tune the TUNE/SELECT knob to fine tune. FM radio presetting is same as DAB
radio presetting
INFO Button
A. The UNIT has DAB information modes which are shown on the bottom line of the display. Long
press the INFO key and tune “TUNE/SELECT” knob to see the available types, press “INFO” to
turn back.
1. Full Scan
Full scan the DAB radio channels
2. Manual Scan
Scan the DAB radio channels manually
3. Dynamic range compression (DRC) (Off/ High/ Low)
This function reduces the difference between the loudest and quietest audio being broadcast.
Effectively, this makes quiet sounds comparatively louder, and loud sounds comparatively quieter.
To Next Page
Loading...
