Stop the Alarm
When the alarm sounds, press POWER, ‘Alarm off’ is displayed.
Note: If you press POWER to stop the alarm, the alarm symbol will remain in the
display and the alarm will sound again at the same time the next day, unless it
was set for ‘Once’ only.
Sleep timer
You can set the unit to turn off automatically using the sleep timer.
1. Press and hold MENU/INFO to enter the menu options.
2. Scroll to <Main menu>. Press SELECT/SNOOZE to confirm.
3. Scroll to <Sleep>. Press SELECT/SNOOZE to confirm Use TUNE +/ TUNE - to
cycle through the different sleep time options such as Sleep off, 15, 30, 45,
60 and 90 minutes.
Note: To cancel the sleep timer, follow the steps to set the sleep time but stop
when ‘off’ is displayed.
SNOOZE FUNCTION
When the Alarm activates, press SELECT/SNOOZE then the alarm will turn off
and will ring again 9 minutes later.
Display backlight brightness
You can adjust the display backlight brightness.
1. Press and hold MENU/INFO to enter the menu.
2. Scroll to <Main menu>. Press SELECT/SNOOZE.
3. Scroll to <Backlight>. Press SELECT/SNOOZE.
4. Use TUNE +/ TUNE - to scroll through the available backlight brightness
Options of 0, 1, 2, 3, 4, 5, 6, 7 and 8. Stop when the backlight brightness you
would like is displayed and press SELECT/SNOOZE.
Display language
You can change the display language of your radio.
1. Press and hold MENU/INFO to enter the menu options.
2. Scroll to <Main menu>. Press and confirm
3. Scroll to <Language>. Press and confirm
4. Scroll to the language you would like. Press to confirm.
ENG 6
To Next Page
Loading...
