5.Basic Operation Methods
Basic interface connection
5.1 Installation Method of Base Support:
Align the hardware piece on base support
with the bottom groove on hardware piece
of rear TV cover before moving upward
and rotating the fixation button till fix the
TV set onto the support.
5.2 Connection Method of Power Supply:
Align the power supply plug on AC
adapter with the jack on the machine
cover marked with DC12V.
5.3 Connection Method of External
Antenna Conversion Line:
Align one end of the attached antenna
conversion line with the antenna jack
on TV set and connect the other end with
the plug of the external antenna.
If receive with telescopic antenna, please pull out the antenna
conversion line.
Notice
Hardware piece
To Next Page
Loading...