To Next PageTo Next Page
Need help?Do you have a question about the Denver IOC-221 and is the answer not in the manual?
General| Number of cameras | 1 |
|---|---|
| Form factor | Dome |
| Weatherproof | Yes |
| Mounting type | Wall |
| Product color | White |
| Protection features | Splash proof, Water resistant |
| International Protection (IP) code | IP63 |
| Type | IP security camera |
| Antenna type | External |
| Antennas quantity | 2 |
| Placement supported | Outdoor |
| Connectivity technology | Wired & Wireless |
| LED type | IR |
| Night vision distance | 40 m |
| Number of illumination LEDs | 4 |
| Pan range | 0 - 355 ° |
| Tilt angle range | 0 - 85 ° |
| Minimum illumination | - lx |
| Bluetooth | No |
| AC input voltage | 100 - 240 V |
| DC output current | 1 A |
| DC output voltage | 12 |
| Power source type | AC, DC |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 12 W |
| Security algorithms | WEP, WPA, WPA2 |
| Total megapixels | 2 MP |
| Maximum resolution | 1920 x 1080 pixels |
| Supported video modes | 1080p |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| Compatible memory cards | MicroSD (TransFlash) |
| Maximum memory card size | 128 GB |
| Operating temperature (T-T) | -10 - 50 °C |
| Sensor type | CMOS |
Weight and Dimensions| Depth | 180 mm |
|---|---|
| Width | 140 mm |
| Height | 300 mm |
| Weight | 808 g |
| Package depth | 198 mm |
| Package width | 235 mm |
| Package height | 128 mm |
Ensure Wi-Fi network, password, and mobile OS version are ready. Use 2.4 GHz Wi-Fi.
Install the DENVER SMART HOME application from the App Store or Google Play.
Enter mobile number or email, then verification code and password to register.
Use reset pin to press and hold the Reset Button until the camera beeps.
Insert a Micro SD card into the device.
In the 'Add device' screen, tap 'Otherwise' in the top right corner.
Select the 'QR code' option for pairing.
Input your Wi-Fi network name and password.
Scan the generated QR code with the camera.
On the main screen, tap '+' and choose 'Smart Camera'.
Ensure the camera's indicator light flashes red, then tap 'Next Step'.
Share camera access with family/friends via 'Home Management' in the app.
Wireless range depends on Wi-Fi router and room conditions.
Check Wi-Fi router status, range, and app firmware updates.
Verify Wi-Fi password, internet connection, and signal strength.
The app supports unlimited devices; router may have limits.
