Denver MAXX - Weighing in Percent

11
Purpose
This application program allows you to obtain weight readouts in percent
which are in proportion to a reference weight.
Example: Determine an unknown percentage; store the weight on the
balance/scale as the reference percentage (100%)
Step Key (or instruction) Display
1. Select application program (ZERO) ≥ 2 sec
2. Select Weighing in Percent (F) repeatedly
3. Confirm setting (ENTER)
Symbol “ “ on the display:
application is active
4. Place empty container on the
balance/scale
5. Zero the balance/scale (ZERO)
6. Place the reference weight
for 100% on the balance/scale
7. If desired, change the number
of decimal places displayed: 100.0%,
100.00% or 100% (factory setting) (F) repeatedly
8. Confirm selected no. of decimal places (ENTER)
9. Place unknown weight on the
balance/scale
10. Toggle display between weight
and percentage (F) repeatedly
11. Unload the balance/scale
12. Weighing in Percent application:
clear the reference percentage (ENTER) ≥ 2 sec
13. Reactivate Weighing in Percent
(if no other application program
has been selected) (F)
14. Repeat procedure starting from Step 5
.
Weighing in Percent