24/55
This feature protects the motor and controller from damage and extends the service life of the electric
components.
Contents
1. Structure of an electrical bicycle
2. Important safety cautions
3. Operation
4. Battery Installation & Usage.
5. LCD and function
6. Using and Maintaining the Battery
7. Using and Maintaining the Charger
8. Using and Maintaining the Motor.
9. Maintaining the Controller.
10. Maintaining the Power-off Control of the Brake Lever
11.. Simple troubleshooting
12. Electric circuit diagram and specifications
13. Main Technical Specification Sheet
1. Structure of this electrical bicycle (See partⅠ.Fig 1~1.1)
2. Important safety cautions:
• We strongly advise wearing an approved helmet, which meets local standards.
• Obey local road rules when riding on public roads.
• Be aware of traffic conditions
• The rider must be over 14 years old.
• Have your bike serviced only by authorized bicycle shops.
• Regular servicing will ensure a better and safe riding performance.
• Do not exceed more than 100kg load on electrical bicycle, including rider himself.
• Never have more than one rider on the bicycle.
• Ensure regular maintenance is carried out on the bike according to this owner’s manual
• Do not open or attempt maintenance on any electrical components yourself. Contact your local
bicycle specialist for qualified service and maintenance when needed.
• Never jump, race, perform stunts or abuse your bicycle.
• Never ride under the influence of intoxicating drugs or alcohol.
• We strongly recommend using lights, when riding in the dark, fog or poor visibility.
• When cleaning this electrical bicycle, please wipe the surface with a piece of soft cloth. For very dirty
areas you can wipe it with a little neutral soap and water.
To Next Page
Loading...
