Denver Orus E-8000 - Battery Installation and Usage

24
4. Battery installation & usage
The electric bikes have the battery positioned within the rear carrier (the battery pack is directly connected
to the controller box in the front (fig 2).
The slider of battery is fixed on carrier by bottom screws (Fig 2.1).
Then the battery case is locked by the key (fig3 & 4) see the operation details below.
(Fig. 2)
(Fig. 2.1)
(Fig. 3)
Firstly, please put the battery case along this slider horizontally (as Fig 3), then push it into and ensure a
snug fit. Second, make sure the battery pack is firmly pushed into the controller housing and its connector
is securely inserted inside the controller box.