Denver Orus E-8000 - Page 34

34
charge your bike strictly
according to this
instruction stated in
Chapter 7, to avoid any
trouble and damage
occurred to your bike.
3) no charging when the power supply is
lower than 220V.
If the above has no effect, please contact
your vendor or authorized service.
There is no speed/KM
show on the LCD
The speed sensor in the hub motor
it’s damaged
please contact your vendor or
authorized service.
12. Diagram and specification
We reserve the right, without further notice, makes modifications to the product. For further advice, please
contact your vendor.
(Fig 17)