EasyManua.ls Logo

Denver Orus E-8000 - Main Technical Specification Sheet

Denver Orus E-8000
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
35
I. Motor 3 phase wire is
connected with motor
1. Green (motor HA)
2. Yellow (motor HB)
3. Blue (motor HC)
II. Motor
1. Red (+5V)
2. Yellow (motor HB)
3. Green (motor HA)
4. Blue (motor HC)
5. Black (ground)
6. White (wheel speed signal)
III. Power wire is connected
with the power
1. Red (+36V)
2. Black (ground)
IV. Brake lever wire is
connected with motor
1. Blue (ground)
2. Red (brake lever signal)
V.
1. Red (+5V)
2. Blue (weak current lock)
3. Black (ground)
4. White (A/D showing)
5. Green (wheel speed signal)
VI. Power wire of speed sensor is
connected with the controller
1. Blue (speed signal wire)
2. Red (+5V)
3. Yellow (ground)
13. Main technical specification sheet
Please find model name of your bike below:
Model
Remark (for reference)
E-TIMES CITY 8000H
E-8000 FM
Here is some of the general technical Data for these electric bikes:
Maximum Speed with Electric Assistance:
25km/h ±5%
Distance per full charge:
90~100km (total loading 75kgs)
Over Current Protection Value:
13±1A
Under Voltage Protection Value:
31.5V
Please find the crossed technical data regarding the bike motor below:
Motor Type:
Brushless with Starry Gears_ with Hall
Maximum Riding Noise:
<60db
Rated power:
200W
Maximum output power:
250W
Rated voltage:
36V
Please find the crossed technical data battery and charger below:
Battery Type:
Lithium
Voltage:
36V
Capacity:
13Ah

Related product manuals