23
● Now you can stop the charging cycle and unplug the power cable. Overcharge
shortens the battery life.
● The charging process takes up to 7 hours. Do not charge the battery for more than 7
hours. After 7 hours, disconnect the charger from the device and the power supply.
Overcharge reduces the battery life.
● The product must not be charged over extended periods.
● Always keep an eye on the device throughout the charging cycle.
● Charge the device only at temperatures between 0 °C and +45 °C.
● When charging at lower or higher temperatures, there is a risk that the battery
performance will be reduced. Therefore, there is a potential risk of injuries and
material damage.
● Store and charge the device in an open, dry area away from combustible materials.
● Do not charge the device in direct sunlight or in the vicinity of open flames.
● Do not charge the device immediately after use. Allow the device to cool down for an
hour before charging it.
● The device is generally partially charged as shipped from the factory. Keep the device
partially charged until it is used.
● Allow the Electric scooter to cool down for at least 1 hour before it can be put in the
package.
● Do not leave the device exposed to sunlight in a car.
CAUTION
The Electric scooter must not be used during the charging cycle!
● The LED indicator on the battery charger lights red during the charging process.
● The LED indicator on the charger will light green when the charging process is
complete.
● After charging, disconnect the charger from the mains and the Electric scooter.
CAUTION
Connect the DC cable supplied with the Electric scooter only to the DC input!
● Do not insert foreign objects into the DC input.
CAUTION
● Remove the cap only when charging the Electric scooter!
● After charging, disconnect the DC plug and close the DC input again with the cap!
To Next Page
Loading...
