To Next PageTo Next Page
Need help?Do you have a question about the Denver SHC-150 and is the answer not in the manual?
General| AC input voltage | 230 V |
|---|---|
| Power source type | AC, DC |
| AC input frequency | 50 Hz |
| Built-in HDD | No |
| Card reader integrated | Yes |
| Compatible memory cards | MicroSD (TransFlash) |
| Maximum memory card size | 128 GB |
| Management software | DENVER SMART HOME |
| Type | IP security camera |
| Placement supported | Indoor |
| Connectivity technology | Wired & Wireless |
| Sensor type | CMOS |
| Number of sensors | 1 |
| Total megapixels | 1 MP |
| Maximum resolution | 1280 x 720 pixels |
| Night vision distance | 10 m |
| Pan range | 0 - 355 ° |
| Tilt angle range | 0 - 90 ° |
| Minimum illumination | - lx |
| Form factor | Turret |
| Mounting type | Wall/Pole |
| Product color | White |
Weight and Dimensions| Depth | 85 mm |
|---|---|
| Width | 70 mm |
| Height | 105 mm |
| Package depth | 117 mm |
| Package width | 140 mm |
| Package height | 88 mm |
| Package weight | 340 g |
Download and install the DENVER SMART HOME app from App Store or Google Play.
Enter your mobile phone number or email address for registration.
Enter the verification code sent to your device and create a password.
Reset the device by holding the reset button and insert a Micro SD card.
Option 1: Use QR code for pairing. Power on device, ensure indicator is flashing.
Option 2: Use smart configuration. Click (+) on Devices screen, choose Smart Camera.
Share camera access with family/friends via Profile and Home Management settings.
Wireless range depends on Wi-Fi router and room conditions. Check router specs.
Check Wi-Fi connection, app version, and firmware for offline camera issues.
Verify Wi-Fi password, check internet, and Wi-Fi signal strength for connection issues.
Dispose of electric/electronic equipment separately from household waste.
Radio equipment SHC-150 complies with Directive 2014/53/EU.
