ENG - 2
2) “°C/°F” button - Press/hold down to switch between Celsius and Fahrenheit
display (°C and °F).
3) “UP” button - Press to select alarm clock
4) “MEM” button - Press to show the max/min temperature and humidity. Press
and hold for 2 seconds to delete max/min temperature and humidity records.
5) “CH” button - Press to switch between CH1/2/3. Press and hold for 2 seconds
to clear the currently registered CH.
6) “SNOOZE/LIGHT” button - Press to turn on backlight.
2. Time setting
1) In time display mode, hold down the “MODE” button for 2 seconds to enter time
setting mode.
2) Press or hold down the “UP” / “DOWN” button to set a time digit.
3) Press the “MODE” button to confirm the setting.
4) Repeat step 2 and 3 above to finish time setting.
5) Time setting mode exits automatically if there is no button operation for 30
seconds.
3. Alarm setting
1) Press the “MODE” button to switch to alarm time display, and then hold down
the “MODE” button for 2 seconds to enter alarm setting mode.
2) Press or hold down the “UP” / “DOWN” button to set a time digit.
3) Press the “MODE” button to confirm the setting.
4) Repeat step 2 and 3 to finish alarm time setting.
5) Alarm setting mode exits automatically if there is no button operation for 30
seconds.
6) After setting, alarm is activated.
Function description
To Next Page
Loading...
