ENG - 4
3. RCC/Radio Controlled Clock (10-minute RCC receiving):
1) RCC signal receiving starts when powering on or resetting the product, or after
RF receiving is available.
2) RCC signal receiving starts automatically every day at 2:01/3:01/4:01/5:01.
3) Hold down the “DOWN” button for 3 seconds to switch to RCC manual mode.
4) Press the “DOWN” button to stop RCC signal receiving when receiving RCC
signal successfully and the RCC symbol ( ) is displayed.
5) The RCC symbol ( ) disappears on the display if resetting time manually.
6) RCC signal indication:
- During RCC signal receiving, the tower-shape part of the RCC symbol
flickers in 1Hz frequency.
- When successful receiving, both the tower-shape and arc parts of the RCC
symbol turn to a solid display.
To Next Page
Loading...
