29
5-4 Shutdown
(1) Turn "OFF" the circuit breaker of the load.
(2) Turn "OFF" the circuit breaker of the machine.
(3) Set the throttle lever in "START/IDLING" position and
put the machine in cooling operation for about 5 minutes.
(4) Set the starter switch in "STOP" position. The engine will
stop immediately.
(5) Remove the key from the starter switch and keep it at
hand.
(6) After engine is shut down, turn the fuel filter cock
sideways to "CLOSE”.
(7) Check the amount of fuel. Supply additional fuel if
necessary.
(8) Check for leakage of oil, fuel and water.
circuit breaker of the load
circuit breaker of the machine
starter switch
To Next Page
Loading...
