(3) Speed change-over switch
START
Automatic idling
i
■LOW
HIGH
Functions:
Ф START / AUTOMATIC IDLING
When the engine is started with the speed change— over
switch set at this position, the engine idles for about 20
seconds and then automatically changes over to high speed
operation.
When starting the engine, set the switch in this position.
© LOW
When the switch is turned to this position, the engine
continues to idle. When stop of the engine, turn the speed
change-over switch to this position and put the machine in
cooling operation for a few minutes before turn the starter
switch to "OFF" position.
© HIGH
Setting the switch to this position releases the automatic •
idling function, allowing the engine to be run at the speed
set by the throttle lever.
(4) Heater switch
When start up the engine at cold weather, this switch is
used.
r 5-3. Starting in the cold weather See p.43 j
(5) Emergency stop button
О
This is a push button to stop the engine urgently on
emergency case.
[N ote]
Do not push the button without emergency case.
-19-
To Next Page
Loading...
