(3) Cleaning of air cleaner element
This element should be cleaned, regardless
of operating time, when the warning lamp of
"Air filter blinding" goes on.
- Dry dust clings on element —
Remove the air cleaner element and clean
the element with dry and clean compressed
air.
* While it is being cleaned, check the element
for any damage. Replace if necessary.
* Before installing the air cleaner, wipe off dirt
on the element cover,
* When insert the element, insert the element
completely pressing equal edge of element.
* If the warning lamp of "Air filter blinding" goes
on immediately after cleaning of element,
replace it
f i
О
x
О
- 6 6 -
To Next Page
Loading...
