2-4 Use of switches and controllers
Switches
Functions:
® Stop
This switch should be set in this position unless the
machine is in operation. The key can be inserted or pulled
out in this position.
(2) Run
This switch should be set in this position when the
machine is in operation.
In this position, the preheating system is energized. When
the preheat indicator lamp lights up, reaching the set
temperature, it goes off.
Then, turn the key to START.
ф Start
This is the position to start the engine. When your hand
is released from the key after starting, it is automatically
set in the position of "RUN".
- 20 -
(l)Starter switch
To Next Page
Loading...
