4-3 Connecting the load
ELECTRIC SHOCK can kill.
В Do not touch the output terminals during operation
to prevent decease due to electric shock.
* When a wiring work is required, be sure to turn OFF
the circuit breaker and stop the machine.
* When operating the engine, close the output terminal cover.
Tighten the fixing bolts before operating the machine.
1 Do not use damaged cables to prevent electric shock.
Insufficient tightening of bolts will generate heat at
connections which may result in fire accidents.
* When connecting, make sure the connecting cables are
normal and connected firmly to the output terminals.
A CAUTION
Connection to house wiring
Ш Before connecting this machine to any building's electrical system, a licensed
electrician must install an isolation(transfer) switch.
* Serious injuiy or death may result without this transfer switch.
- 29 -
To Next Page
