5. Operation
— From pre-start check to shut down ~
Be sure to check the machine prior to starting.
1. Pre-start check : Check oil, cooling water, fuel and so on.
2. Periodical check: Check each part of the machine according to operating time.
3. Startup: Check the surroundings of the machine for safe operation.
Use a sign before startup.
4. Operation: A In the machine there are moving parts, high temperature parts
and high voltage parts. Before operating, close the door and lock the
side door for safe operation and for prevention of noise.
[Note] : If the warning lamp lights, stop the engine and check the cause of it.
[Note] : Check for leaks of oil, water, exhaust gases, and for unusual noise.
5. Shut down
5-1 Checking prior to operation
A WARNING
MOVING PARTS can cause severe injury.
В Rotary unit which runs at a high speed is located in the
machine. (Note that it is very dangerous if you touch it.)
* Be sure to close the door and lock it during operation.
* When making check or maintenance of the machine, be sure
to stop the machine in advance.
— To prevent unexpected trouble, be sure to check the following points.
(1)
Check on engine oil (lubricating oil)
(2)
Check on engine cooling water
(3)
Check on fan belt
(4)
Check on fuel
(5)
Check on battery acid
(6)
Check on grounding for electric shock protection
(7)
Check for leakage of oil and water
(8)
Check for loose parts
(9)
Removal of foreign objects in machine
22
To Next Page
Loading...
Need help?
General
