4
1 .Temple Touch Pro™ (TTP™) Introducon
The purpose of this document is to describe the proper way to
setup, use and maintain the Temple Touch Pro™ (TTP™) system.
The TTP™ system and the manual are intended to be used by
healthcare professionals in medical care environments only.
PriortoinstallingorusingtheTTP™system,readandfollowall
instrucons, labeling and accompanying documents supplied
withtheTTP™system.Failuretofollowinstruconscouldlead
tomisuseofthedevice,devicemalfunconorpaentinjury.
2. Intended Use of the TTP™
The TTP™ is intended to measure and monitor core body
temperatureof paents of all ages,by applying an SUon the
temple.
3. Warning and Safety Noces
WARNINGS:
1. The TTP™ system shall be aached to other equipment
only by authorized personnel.
2. Do not use the TTP™ system if one or more of its components
appeartobedamaged,broken,cracked,burned,torn,etc.
3. DonotaempttorepairormodifyanyoftheTTP™system
components.
4. Forsafeuse,useONLYoriginalTTP™systemcomponents
and accessories. Use only the original TTP™ MCU and
powersupplyspeciedandsuppliedfor thisproductand
ceredforthecountryofuse.
5
5. The TTP™ MCU must be connected to the applied part
connector of a safety approved medical grade vital signs
monitor(VSM).TheconneconshallbemadetotheVSM
inputforappliedpartwhichismarkedasCFappliedpart.
6. Keeppowersupplyvisibleandaccessibleatallmes.The
power outlet shall be easily accessible. To disconnect the
TTP™ system from mains (power line): Disconnect the
power supply from the wall outlet.
7. Use only a properly grounded power outlet; do not use
extensioncablesormulpleportablesocketoutlets.
8. Donotallowthepowersupplytogetwet.
9. DonotusetheTTP™systeminthepresenceofaammable
anesthecmixtureornitrousoxide.
10. Do not use any of the TTP™ system components in an MRI
environment.
11. DonotallowthepaenttolieontheTTP™SCU.
12. Always posioncablesandwiresaway fromthe paent’s
body.
13. Do not use an exterior device to secure the TTP™ SU to the
paent.
14. Limit use of the TTP™ SU to 24 hours in order to reduce the
riskofskinirritaons.
15. In cases of intenonal hyperthermia or hypothermia
therapy use a dierent thermometer to measure body
temperature.
4
1 .Temple Touch Pro™ (TTP™) Introducon
The purpose of this document is to describe the proper way to
setup, use and maintain the Temple Touch Pro™ (TTP™) system.
The TTP™ system and the manual are intended to be used by
healthcare professionals in medical care environments only.
PriortoinstallingorusingtheTTP™system,readandfollowall
instrucons, labeling and accompanying documents supplied
withtheTTP™system.Failuretofollowinstruconscouldlead
tomisuseofthedevice,devicemalfunconorpaentinjury.
2. Intended Use of the TTP™
The TTP™ is intended to measure and monitor core body
temperatureof paents of all ages,by applying an SUon the
temple.
3. Warning and Safety Noces
WARNINGS:
1. The TTP™ system shall be aached to other equipment
only by authorized personnel.
2. Do not use the TTP™ system if one or more of its components
appeartobedamaged,broken,cracked,burned,torn,etc.
3. DonotaempttorepairormodifyanyoftheTTP™system
components.
4. Forsafeuse,useONLYoriginalTTP™systemcomponents
and accessories. Use only the original TTP™ MCU and
powersupplyspeciedandsuppliedfor thisproductand
ceredforthecountryofuse.
5
5. The TTP™ MCU must be connected to the applied part
connector of a safety approved medical grade vital signs
monitor(VSM).TheconneconshallbemadetotheVSM
inputforappliedpartwhichismarkedasCFappliedpart.
6. Keeppowersupplyvisibleandaccessibleatallmes.The
power outlet shall be easily accessible. To disconnect the
TTP™ system from mains (power line): Disconnect the
power supply from the wall outlet.
7. Use only a properly grounded power outlet; do not use
extensioncablesormulpleportablesocketoutlets.
8. Donotallowthepowersupplytogetwet.
9. DonotusetheTTP™systeminthepresenceofaammable
anesthecmixtureornitrousoxide.
10. Do not use any of the TTP™ system components in an MRI
environment.
11. DonotallowthepaenttolieontheTTP™SCU.
12. Always posioncablesandwiresaway fromthe paent’s
body.
13. Do not use an exterior device to secure the TTP™ SU to the
paent.
14. Limit use of the TTP™ SU to 24 hours in order to reduce the
riskofskinirritaons.
15. In cases of intenonal hyperthermia or hypothermia
therapy use a dierent thermometer to measure body
temperature.